In the framework of the project for the technical re-equipment of the PE 500-180-3 (Art. No.NP-3), our company will supply oil considerations with air-cooled N17.330.300.00 to supply oil into the lubrication system.
The oil establishment is supplied in block design, in maximum factory readiness. It is equipped with centrifugal semi-duty oil pumps, which eliminates the external leakage of oil through the end seals, and due to the absence of rubbing elements, their interremary period is significantly increased.
Instead of water-oil tubular heat exchangers, a forced-cooling heat exchanger is used with the fan supplied.
Thus, there is no need for cooling water in the oil installation, and the unit itself operates in automatic mode: the fan turns on at an oil temperature of +45 C and turns off when the oil temperature drops to +35 C.
The experience of operating these oil plants at power generation facilities has confirmed their high technical and economic efficiency, which provides a significant reduction in maintenance costs due to the automation of the process.
With the wish of stable development,
team EnergoFront #FrontProject
Share: